How To: Setup Cyber Cafe

Example:

setup new cybercafe for 11 pc's, 1 printer, 1 scanner

What you need?
- PC's with complete set
- 1 unit printer
- 1 unit scanner
- Hub with 16 port's
- Modem
- Network cable + RJ45

What you should do?
- apply for telephone line

STEP1
Setup 1 pc with operating system. Install all you need like antivirus, firefox anythings you like and after that configure it. Example set account as limited account prevent from user change any settings. After finish, copy to all computer using ghost. How? refer here related link

Step2
Manage you computer place with table. This is because you need to know distance each PC's to make network cable.

Step3
Make network cable with RJ45. If you don't know how to do it, please refer here related link
If not you need to buy ready made network cable but the problem is distance all Pc's need change coz network cable in 5meter, 10 meter. It's not in 3meter or 7 meter hehehe unless you ask shop to do it for you and you just pay to shop

Step4
1 pc set as main. Owner only can used not for customer. So install printer on that PC and set sharing (printer). Install scanner too. After that create network - workgroup. Please refer here related link

Step5
Configure you modem/router and test with main PC first. Make it till it's can connect with internet. After that plug you modem with hub and your main pc with hub using network cable. It's should be can connect with internet after plug in. Please refer here related link

Step6
Connect all PC's with network cable to the hub. Make sure you use same workgroup name as step4.

Step7
Try with all PC's and should be all Pc's no problem to connect the internet. After that Install all PC's with printer using network

That's it. Now you done